Product
Stainless steel monofilament
Stainless steel monofimament
Stainless steel wire, also known as stainless steel mono filament, is made of stainless steel as raw materials of all kinds of different specifications and models of silk products, the origin of the United States, the Netherlands, Japan, the cross-section is generally round or flat.
Various metals and alloys of different section shapes and sizes of wire can be produced by drawing. The drawn wire has precise size, smooth surface, and simple drawing equipment and mold used, and is easy to manufacture. The stress state of the metal wire drawing is the three-way principal stress state of the two-way compressive stress and the one-way tensile stress.
Advantage
Compared with the principal stress state of the three-way compressive stress, the metal wire drawing is easier to reach the plastic deformation state. The deformation state of drawing is the three-way main deformation state of bidirectional compression deformation and tensile deformation, which is unfavorable to the plasticity of metal materials and easier to produce and expose surface defects. The pass deformation of metal wire drawing process is limited by its safety factor. If the pass deformation is small, the drawing pass is more, so multi-pass continuous high-speed drawing is often used in the production of metal wire.
Material Basis and Contents
|
Component |
Chemical Composition (%) |
CAS NO |
|
C |
0.016 |
7440-44-0 |
|
Si |
0.31 |
7440-21-3 |
|
Mn |
1.03 |
7439-96-5 |
|
P |
0.034 |
7723-14-0 |
|
S |
0.002 |
7704-34-9 |
|
Cr |
17.63 |
7740-47-3 |
|
Ni |
12.1 |
7740-43-9 |
|
Mo |
2.07 |
7439-92-1 |
|
Fe |
Rest |
7439-89-6 |
Wire Specification
| Stainelss Steel Material |
Wire Diameter |
|
316L |
0.03mm |
|
316L |
0.035mm |
|
316L |
0.05mm |
|
304 |
0.03mm |
|
304 |
0.035mm |
|
304 |
0.05mm |
